Low-Absorption Tile Adhesive

Cement-based powder adhesive for tiles, ceramics, and stone

This product is one of the most important products manufactured by Bekfa Company, which has a standard certificate from the National Standards Organization.

Product Application:
1- Installation of all types of stone
2- Installation of tiles and ceramics with low water absorption
3- Installation of facing bricks with low absorption
4- Installation of antique stone
5- Installation of tiles, ceramics, and stone over previous tiles, ceramics, and stone without demolishing them. (Interior and exterior building repairs)

Product Features:
1- High adhesion and strength, and lightweighting
2- Fast-setting and eliminating the underlayment of materials
3- High speed of operation and eliminating transportation and transfer costs
4- Insulation against heat and cold, sound, fireproof and anti-freezing
5- Reduction of final cost compared to similar products
6- Reduction of thickness and consumed mortar
7- Reduction of the amount of materials consumed per square meter (maximum 4 kg per meter)

Executive Instructions:
1- Add water at the rate of 30 to 35% of the weight of the powder adhesive
2- Mix with water for 5 to 7 minutes.
3- Before installation, the desired surface should be screeded, leveled, and moistened.
4- Spread the prepared adhesive mortar to a thickness of 3 to 4 mm and after 3 to 5 minutes, install the tile, ceramic, or stone.
5- Initial drying time is 15 minutes and complete drying is 6 hours.
Note: The prepared mortar must be consumed within a maximum of 12 hours.